Scarifier/Grinder
The DESCO Stand-Up Scarifier and Belt Grinder was ERGONOMICALLY designed to ease the users fatigue by getting them OFF their knees while INCREASING PRODUCTIVITY! This Stand-Up scarifier is the most aggressive, light weight walk behind tool available today. This tool uses either a cutter hub, hammer hub or the NEW INNOVATIVE cushion hub with a 36 grit Desco-XL abrasive belt.
Applications
|
Cutter Hub/Hammer Hub
|
|
Cushion Hub
|
|
● Non-skid removal
|
|
● Weld grinding
|
|
● Rust/scale removal
|
|
● Scar removal
|
|
● Surface profiling
|
|
● Mil scale removal
|
|
● Traffic line removal
|
|
|
Configurations
|
Part
|
Description
|
Hub Included
|
|
110.224
|
SUFX,
Standard
|
Cutter
hub, welded
|
|
110.2243
|
SUFX, Reloadable
|
Cutter hub, reloadable
|
|
110.2246
|
SUFX, Roto-hammer
|
Hammer hub
|
|
110.2245
|
SUFX,
Belt grinder
|
Cushion
hub
|
Specifications
|
Item
|
Value
|
|
Power
|
120V,
15A
|
|
Speed (no load)
|
6,000 rpm
|
|
Weight (motor, body, no hub)
|
42 lbs.
|
|
Length
|
30"
|
|
Height
|
39"
|
|
Vacuum Hose Req.:
|
|
|
Diameter
|
1-1/2" ID
|
|
Length:
|
10′
standard, 25′ max
|
Interchangable Hubs
|
Hub Type
|
Description
|
|
|
Cutters are used to remove heavy coatings including epoxy and elastomeric type coatings, mastic removal, non-skid removal, as well as concrete scarification. Two types of cutter hubs are available:
1) Welded – when cutters wear out the hub is discarded.
2) Reloadable – when cutters wear out, the hub is reloaded. A reload kit is available which includes cutters, pins and hardware.
|
|
|
Roto-Hammers are very effective in removing fracturable coatings. Due to their design, they are also ideal for removing coatings from irregular surfaces or surfaces with holes or protruding objects such as nuts, bolts, rivets and welds. Due to the Roto-Hammer design, they perform much like a needlegun in terms of both profile and versatility. Hammers will step over obstacles like bolt heads and step into depressions, in the same manner as the needles of a needlegun.
|
|
|
Cushion hubs are used for applications requiring coated abrasives. The cushion hub excels at tasks such as post-weld leveling and grinding off scars left by cutting off lifting padeyes. These post-weld tasks are traditionally done with a hand held grinder with the tool operator on his knees. However, the SUFX/Cushion setup provides significant advantages over a hand-held grinder process, including: 1) Productivity – faster results, 2) Esthetics – no swirl marks and, 3) Ergonomics – the worker operates the machine from a standing position. .
|
Consumables
|
Part
|
Description
|
|
Interchangable Hubs
|
|
110.032
|
Hub, Cutter,
Reloadable, w/cutters
|
|
110.022
|
Hub, Roto-Hammer (eq. to a high
speed needlegun)
|
|
110.096
|
Hub, Cushion (for use with abrasive belts)
|
|
Consumables
|
|
110.033
|
Reload,
cutters
|
|
820.54677
|
Abrasive Belt, 36 grit (other grits available)
|
|
Accessories
|
|
110.001
|
Replacement Brush Set for Dust Collector. Comes with brush, channels and rivets
|
|
